C/146000, C/146100, C/146200
3/10
N/us 1.6.009.02
Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
S
ymbol Type (magnetic piston) Description Page
C
/146000/M With internal guide 7
C/146100/M With external adjustable guide 9, 10
C
/146200/M With precision roller guide (ø 25
.
..
6
3 mm) 13
C
/146200/PM With added caged ball linear motion guide (ø 25
.
..
6
3 mm) 15
C/146000/MC With alternative ports (ø 25...63 mm) 29
C/146100/MC
C
/146200/MC
C
ylinder with double carriages
C/146100/MD With external adjustable guide (ø 16
...
80 mm) 11, 12
C
/146200/MD With precision roller guide (ø 25
.
..
6
3 mm) 14
C
/146000/L3 Active holding brake (ø 25
.
..
6
3 mm) 16, 17
Applying pressure activates the brake
The brake lining is pushed against a stainless steel strip.
T
o release, depressurize.
C
/146000/L4 Passive holding brake; (ø 25
.
..
6
3 mm) 18, 19
Applying pressure releases the brake. When the pressure
is released the brake lining is pushed against the stainless
s
teel strip by a spring loaded plate.
C/146000/F1 With internal guide and linear position sensor (ø 32
...
63 mm) 20
Electrical data of linear position sensor:
Operating voltage: 10 ... 30 V d.c.. resolution 16 bit.
Repeat accuracy 0.006 %. output 4 ... 20 mA. short-circuit protection
L
inearity 0.05 % of measuring range. protection class IP67
C/146100/F1 With external adjustable guide 21
and linear position sensor (ø 32
...
63 mm)
C
/146200/F1 With precision roller guide 21
a
nd linear position sensor (ø 32
.
..
6
3 mm)
Options selector
C / 146 ˙˙˙ / MC / ˙˙˙˙
Strokes (on request)
Provide in Inches C version
Provide in Metric M version
Options (magnetic piston) STD. Substitute
Magnetic piston M
(standard on 16, 20, and 80 mm bores)
Alternative ports MC
1
(standard 25, 32, 40, 50, 63 mm bores)
Active brake (25 to 63 mm bores) L3
Passive brake (25 to 63 mm bores) L4
With added caged ball linear motion guide PM†
With linear position sensor (32 to 63 mm bores) F1
Double carriages * MD**
Guiding system Substitute
Internal 0
External 1
Roller 2
Cylinder Ø (mm) Substitute
16 16
20 20
25 25
32 32
40 40
50 50
63 63
80 80
Note: Disregard option positions not used.
For combinations of cylinder variants consult our Technical Service.
This options selector explains only the cylinder variants.
Additional variants/options are not possible.
* For C/146100 & C/146200 only
** MD option available in 1461** External
and 1462** Roller guided carriage
Ordering information
Cylinder
LINTRA
®
cylinder with internal guiding system.
Ø 32 mm cylinder diameter and 10' (3000 mm) stroke length
with magnetic piston, and NPT ports.
Quote: C/146032/MC/120
Opitional finish Substitute
Standard non-anodized caps Blank
Black anodized caps and carriage A
Black anodized caps and carriage AS
with stainless steel hardware
Note: Options A and AS available only on metric port.
Ports Substitute
NPT ports (Ø 20 to 80 mm) C
Metric ports (Ø 16 to 80 mm) M
C/146***/MD/****/****
Distance between
carriage centers (inches)
Effective
stroke
1 Not available on 16, 20, 80 mm bores.
† Order PM option as 1462**
(14 paginas)
(3 paginas)
(2 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales