Norgren Filter Contents Manual de usuario Pagina 33
- Pagina / 53
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
F74C/H Oil Removal (Coalescing) Filters
Littleton, CO USA Phone 303-794-2611 www.norgren.com
ALE-2-9
All Dimensions in Inches (mm)
Technical Data
Fluid: Compressed air
Maximum pressure
Transparent bowl: 150 psig (10 bar)
Metal bowl: 250 psig (17 bar)
Operating temperature*
Transparent bowl: -30° to 125°F (-34° to 50°C)
Metal bowl: -30° to 150°F (-34° to 65°C)
* Air supply must be dry enough to avoid ice formation at temperatures below 35°F (2°C).
Particle removal: Down to 0.01 µm
Air quality: Within ISO 8573-1, Class 1 (particulates) and Class 2 (oil content)
Maximum remaining oil content in outlet air: 0.01 ppm at 70°F (20°C) with an inlet
concentration of 17 ppm
Maximum flow at 90 psig (6.3 bar) inlet pressure to maintain stated oil removal
performance
F74C: 33.9 scfm (16 dm
3
/s)
F74H: 59.3 scfm (28 dm
3
/s)
Manual drain connection: Will fit 1/8-27 and 1/8-28 pipe thread.
Automatic drain connection: Will fit 1/8-27 and 1/8-28 pipe thread. - Flexible tube
with 3/16" (5mm) minimum I.D. can be connected to the automatic drain. Drain
may fail to operate if the tube I.D. is less than 3/16" (5mm). Avoid restrictions in
the tube.
Automatic drain operating conditions (float operated)
Bowl pressure required to close drain: Greater than 5 psig (0.3 bar)
Bowl pressure required to open drain: Less than 3 psig (0.2 bar)
Minimum air flow required to close drain: 2 scfm (1 dm
3
/s)
Manual operation: Depress pin inside drain outlet to drain bowl
Nominal bowl size: 7 fluid ounce (0.2 liter)
Materials
Body: Aluminum
Bowl
Transparent: Polycarbonate with steel bowl guard
Metal: Aluminum
Metal bowl liquid level indicator lens: Transparent nylon
Element: Synthetic fiber and polyurethane foam
Elastomers: Neoprene and Nitrile
Service indicator
Body: Transparent nylon
Internal parts: Acetal
Spring: Stainless steel
Elastomers: Nitrile
An automatic drain is a two-way valve, which will close when the system is
pressurized. The drain opens when the float rises due to accumulated liquid
and on depressurization.
Typical Performance Characteristics
0 5 10 15 20 25 dm
3
/s
AIR FLOW
0 10 20 30 40 50 scfm
0.6
0.4
0.2
0
PRESSURE DROP
bar d
10
8
6
4
2
0
psid
PORT SIZE: 1/2"
ELEMENT: SATURATED (F74C)
36
(2.5)
90
(6.3)
58
(4.0)
150
(10.0)
116
(8.0)
INLET PRESSURE: psig (bar g)
FLOW CHARACTERISTICS
Maximum flow to
maintain stated oil
removal performance
PRESSURE DROP
0.6
0.4
0.2
0
bar d
10
8
6
4
2
0
psid
PORT SIZE: 1/2"
ELEMENT: DRY (F74C)
36
(2.5)
58
(4.0)
150
(10.0)
90
(6.3)
116
(8.0)
INLET PRESSURE: psig (bar g)
AIR FLOW
0 10 20 30 40 50 dm
3
/s
0 20 40 60 80 100 scfm
FLOW CHARACTERISTICS
F74C
PRESSURE DROP
0.6
0.4
0.2
0
bar d
10
8
6
4
2
0
psid
PORT SIZE: 1/2"
ELEMENT: SATURATED (F74H)
36
(2.5)
58
(4.0)
90
(6.3)
116
(8.0)
INLET PRESSURE: psig (bar g)
AIR FLOW
0 10 20 30 40 50 dm
3
/s
0 20 40 60 80 100 scfm
FLOW CHARACTERISTICS
Maximum flow to
maintain stated oil
removal performance
PRESSURE DROP
0.6
0.4
0.2
0
bar d
10
8
6
4
2
0
psid
PORT SIZE: 1/2"
ELEMENT: DRY (F74H)
36
(2.5)
58
(4.0)
150
(10.0)
90
(6.3)
116
(8.0)
INLET PRESSURE: psig (bar g)
0 20 40 60 80 100 dm
3
/s
AIR FLOW
0 40 80 120 160 200 scfm
FLOW CHARACTERISTICS
8.44 (215)
F74H, Automatic Drain
9.04 (230)
11.18 (284) **
11.81 (300)**
F74H, 1/4
Turn Manual Drain
6.95 (177)
F74C, 1/4
Turn Manual Drain
9.80 (249) **
3.15 (80)
1.45 (37)
2.89 (74)
2.36 (60)
†
1.00 (25)
Service
Indicator
6.35 (161)
F74C, Automatic Drain
9.17 (233) **
** Minimum clearance required to remove bowl.
† Dimension for alternative electrical service indicator is 1.98" (50.4 mm)
Automatic and Semi Automatic Drain
Manual Drain
ISO Symbols
- ALE-Filter 1
- 1.1 GENERAL OVERVIEW 2
- 1.2 AIR QUALITY 2
- 1.3 PLASTIC BOWLS 3
- 1.4 DRAINS 4
- 1.5 PERFORMANCE 4
- 1.6 FILTER SIZING 5
- 1.7 MEMBRANE DRYERS 5
- Solid Water Oil 7
- Particle Maximum Maximum 7
- General Purpose Filters 8
- F07 General Purpose Filters 10
- F72G General Purpose Filters 12
- F73G General Purpose Filters 14
- F74G General Purpose Filters 16
- F64G General Purpose Filters 18
- AIR FLOW 20
- 0 40 80 120 160 200 dm 20
- F17 General Purpose Filters 22
- F18 General Purpose Filters 24
- Oil Removal 25
- (Coalescing) Filters 25
- Automatic and 26
- Semi Automatic Drain 26
- Manual Drain 26
- 2°C (35°F) 27
- ** Mounting holes 27
- 1.97 (50) 29
- Oil Vapor Removal 42
- (Adsorbing) Filters 42
- F72V Oil Vapor Removal Filter 44
- F74V Oil Vapor Removal Filter 46
- 4.13 (105)** 48
- * Only available with F68V 49
- ** Only available with F68Y 49
- F68V/Y Vapor Removal Filters 50
- F46 Oil Vapor Removal Filter 51
- F46 Oil Vapor Removal Filters 52
Relacionado con productos y manuales para Hardware Norgren Filter Contents
Hardware Norgren B38-240-B2KA Manual de usuario
(4 paginas)
(4 paginas)
Hardware Norgren B73G Series Manual de usuario
(2 paginas)
(2 paginas)
Hardware Norgren Filter/Regulators Manual de usuario
(18 paginas)
(18 paginas)
Hardware Norgren B38P Series Manual de usuario
(3 paginas)
(3 paginas)
Hardware Norgren L73C Series Manual de usuario
(2 paginas)
(2 paginas)
Hardware Norgren L74C Series Manual de usuario
(2 paginas)
(2 paginas)
Hardware Norgren Lubricators Manual de usuario
(26 paginas)
(26 paginas)
Hardware Norgren R06 Series Manual de usuario
(2 paginas)
(2 paginas)
Hardware Norgren UI200 Series Manual de usuario
(2 paginas)
(2 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.054 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales